Create this project yourself with sheet material cut to size by TOSIZE.be!

Zoltan

Above average

1 minuut

Description

Retro look record furniture. 3 storage cubes measuring 36.0x36.0 cm, a leaf tray and a tray for your player, with another compartment underneath. Okoumé plywood for the red shine after treatment.

DIY: turntable furniture

Make sure you look at all the pieces and think about which plane you want to see, mark on the sticker O (nder) B (oven) and V (ear). Think about which planes should connect. Drill all sides with the dowel jig. Then glue in the dowels on this side and drill the corresponding face. Put the box together :-) Glue the left side area only after you have the tube ready! (sawing, spraying, drilling) The tube is 10mm round aluminum profile. From the profile wall of the hardware store. I made the base of 20x20x2 steel, welded myself. (12.0 cm high) Need: -2x 140.0 cm -2x 40.0 cm -4x 12.0 cm -Welding supplies and skills :-) The right back corner has a 15x15x15mm hole left. I welded a piece of steel for this and sprayed it in the same satin black. Fill in this corner as you wish!