Realize a sea work of art step by step, with Joyce

Related projects
TOSIZE Furniture
Check out our new shelf cabinets 3D configurator
Create DIY projects in a breeze!
Start designing right away
TOSIZE Furniture
Check out our new shelf cabinets 3D configurator
Start designing right away

Create this project yourself with sheet material cut to size by!




Above average

2 minutes


I have on the mdf paneel created a work of art from a sea of ​​cast resin and sand, among other things. The work is finished with an aluminum edge.

A work of art with a base of MDF

I first gave the panel two good layers of black gesso. I then attached the aluminum edge and covered it with masking tape.

For the sand, I applied a thin layer of casting resin to part of the panel. Here I pressed a thick layer of sand. After 24 hours I removed the loose sand.

I then applied the first layer of water with clear casting resin. That's where I put the shells. I applied white casting resin (white made with pigment paste) to the edge of the water and spread it widely by blowing with a straw. Allow this to dry thoroughly first.

The second layer of water has been given a somewhat transparent turquoise color using acrylic ink. The casting resin should be a bit thick so that you get height. I also blew the white border here. Make sure this is dry before you continue.

The last wave consists of two opaque colors of turquoise using acrylic ink for a gradient and another white border. I also blew out some white on the water here.

Remove the painter's tape in parts where you are finished.

The diameter of the artwork

p>50.0 cm

Tip! Also check out our handy DIY tips!

How next?

Want to make this DIY project? Check out Joyce's saw list and complete your order easily.

398,48 €

All materials used


View all sheet materials